Almost all IPTV providers do reseller program. It's a good source of income, economical and less headaches. why? because the provider will have many subscribers through one person, all technical support and marketing is done by the reseller and that is the person who pays up in front to get their panel credited. In this article we`ll explain A to Z about reseller section of one of the most common IPTV panels, Xtream Codes.
Most of the people like to make money, specially from stuff like IPTV but whenever they are told "why don't you do it as a reseller?" they usually panic! their reason is "not sure how it works" or "what if a client has technical issues? how do I investigate and resolve?". Yeah probably that is true, but here is a simple fact: Read this guide and few others which will come after this one and you`ll work with this panel like a boss!
After logging onto the reseller panel from the provider subscribed to, you should see the above. This is the main page. General info about online users are shown above plus notifications from the provider which will appear in the middle of the page. On top left, username is shown with the amount of credits left on it.
Section in blue is called Online Users which shows number of each individual connected user. It is the combination number of all online accounts: Streaming Lines, MAG or E2 Devices.
Green one is called Open Connections. It monitors the amount of connections which are made to the server(s). For instance, if an account is used on a single device, it should occupy 1 connection slot of the server so basically the panel will show 1 Online User and 1 Open Connections, but if the client uses one account on two devices, then it will make 2 connection slots busy. Abusing theory pops into your mind, yeah ;) but fear not! providers limit each account to only 1 connection by default unless they want to allow more. Flood Protection on the main server will teach any abusing client a good lesson if they try to flood the server by too many queries.
The purple section monitors the average amount of server bandwidth in Megabits which is being used by your clients.
The orange part (or what ever that color is) shows all your Active Subscriptions, the ones which are ready to be used. Blocked subs are not included.
These numbers can give you a good insight of what goes on and the higher they are, the better you are doing your marketing and business.
Now roll your eyes to the top column:
--Main Page: It the page you see right after logging in and it has been shown in the picture above.
--Connections: Shows your Live Users & Connection Logs
No matter what type of user account you may have created (Streaming Line, MAG or E2), the moment they go online, they appear on this page. Details here give you a handy insight about your clients` connection status and also how to diagnose and resolve issues they may have. From top above
-Generate Trial: This allows you to create a 48 Hours Trial. You are allowed to give them out for free. NOTE: Do not abuse this function and only give out to serious interested customers. If you do not follow the rules you will be banned.
By clicking on it, above page shows up. Here is where you can create the desired streaming line. It has to be said that some providers don`t allow resellers to make their own desired password.
Username/Password as the username please enter the email address of your customer. Usernames are not allowed! As password leave it blank and it will auto generate a password.
Package is the part where you decide on the service period and possible channel bouquets.
By clicking on the scroller you`ll see what the package options are. Now imagine we choose 1 Month package.
Notes is very important! yes, write necessary details and information about your client here so later in the future you can refer to this info if necessary. Remember, this section (like all other sections) is visible to your admin so don`t put any high risk private info here.
By clicking on Create New Line the process is finished and the account is made.
In here you will be able to see all you current lines in your account. Here you will be able to share streaming links with your customers.
Download is the most important part as this is the section from which you extract the account script link:
By clicking on downward green arrow a scrollable list of different scripts each with different video container type. Choose the right script and then a link will appear in the field. Finally the desired script file can be downloaded from that link by pasting it into your browser or pasting the link itself into the app/plugin/software as the source of stream feed. To learn more about these types and most common ones read this article.
Options is another important part here. is to kick user down. This is good when you block a client and he still stays online so this will kick the user down. disables the account. lets reseller edit the notes or editable parts of the account. this resets ISP Lock. Some smart providers apply a feature on their lines, specially trial accounts, so that the account gets paired to the first IP address it receives connection request from. This way no other IP address is able to connect using the same account. It is good to make sure no one abuses trial accounts. For paid accounts, it would be considered as a weak point because a paid client wants to play the service where ever he goes. This is configured by server admin. deletes the account but never use that, at least not at once. Anything you type or assign by mistake can be corrected by server admin. At any rate, even if you delete this, like any other action you do, is fully logged for admin.
--Extend Line: If a reseller does his job well and the server admin commits to the quality promises, client will as for renewal. Here you can renew all accounts created in streaming line section.
After the above page appears, paste or type the username which you want to extend. If you type the first letter it appears below the field and you can choose it. Then select your desired package.
After selecting the package you`ll see the containment of the package and the rest of it as shown before. Click extend line and it`s done.
--Add New MAG Device: It`s basically the same as creating a streaming line explained above but here there are no username or passwords and that is good. When your client says his device is MAG, just ask him to send you his device mac address. They usually know where to get it but if they don`t, it is written under the box.
Looking at the bottom of a MAG box, MAC address which is required for activation on IPTV panel system is written. It can also be seen by going to setting page of the MAG box.
Now put the MAC address in Device MAC Address field and Select Package to Assign to This Line.
Now it`s ready to be done. Click Create New Line. Now send your client the stalker portal url of your service. Client simply needs to type this address on the url field of the profile page of the MAG device. Stalker Portal URL should be provided by server admin.
--Manage MAG Devices:
It`s almost identical to Manage Lines explained before with only two new sections: Device MAC Address instead of username/password and Actions. Let`s see what Actions let us do:
Force Channel to Play is used when the channel is no playing and it is stuck on loading on client`s side.
Reload Portal is used when the portal software on client`s device is stuck or you want the portal to reload anyways, probably whenever it is necessary for some changes to take effect.
Reboot will reboot the portal on client`s side and the connection slot on server side.
Send Message will let you send your client a message which will pop up on the screen.
Close Portal will close the Stalker Portal on client`s side.
--Extend MAG: this is completely the same as streaming line section.
-Enigma2 Devices (Plugin): Before proceeding, you should understand what E2 Plugin is, how it works and how to install it on Enigma 2 boxes. Please read this article first.
--Add New E2 Box: This section is completely identical to Add New Enigma Device explained above.
--Extend E2: This section is completely identical to Extend Enigma Device explained above.
--Manage E2 Devices: This section is completely identical to Manage Enigma Devices explained above.
This section is reseller`s own account details page. You can Change Your Password, change Default Language from English to Italian or Portuguese or enable Google 2Factor Authenticator Code which will added a 2nd layer of protection to your login credentials.
-Tickets Support: (which should have been written Support Tickets)
--Create Support Ticket: Open a support ticket if you have any problems.
--Manage Tickets: A list of already created support tickets by the reseller.
Remember, most server admins manage their support tickets through a separate ticket systems, so it is advised to ask the admin about the contact details in case any support is needed.
Ok that is all :-)